Aluminum Litho Sheet Scrap shall consist of new, clean lithograph sheets. It may consist of 1000 or 3000 series alloys, but must be free of paper, plastic, excessively inked sheets and any other contaminants.
Aluminum Nodules shall consist of clean aluminum, either chopped or shredded. It must contain 99.45% aluminum content and must be free of screening, hair-wire, iron, copper, insulation and other non-metallic items.
Radiators basically transfer heat from the coolant to the air. Radiators are usually made from aluminum and copper. The primary difference between copper and aluminum radiators is that aluminum radiators have wider tubes to carry…
Brass Radiator Scrap consists of radiators used in automobiles and home heating systems. It should be free of steel and iron at the sides of the material. It must not contain any coolant inside. The…
Braziery Copper consists of copper that are already tinned, soldered, brazed or painted. It should be at least 95% copper and can contain even up to 5% brass.
Cast Iron Scrap is an alloy of iron that contains high amounts of carbon. The carbon content makes it susceptible to corrosion. As a result, Cast Iron scrap is often rusted and worn. It is…
Cellular Phone Scrap consists of old cellular phones with or without batteries. The introduction of newer cell phone models and the inherent tendency of humans to embrace changing technology results in millions of cellular phones…
Copper/Aluminum Radiator Scrap consists of unalloyed copper tubing surrounded by aluminum cooling fins. They are generally derived from heat exchange radiators.
Copper/Large Electric Motor Scrap consists of large electric motors that are more than 1 horsepower in size. It also includes copper coil windings from such motors.